Handleiding
Je bekijkt pagina 31 van 118
31
EN
- CAUTION! Do not exceed the allowable working hours. Wait
for the device to cool down before starting it up again.
-
CAUTION! Do not fill the jug (bottle) of the blender with boiling
liquids.
-
CAUTION! Do not start the blender with an empty jug (bottle).
APPLIANCE DESCRIPTION
1. Replaceable battery
2. Battery mounting socket
3. Blender housing
4. Puls function button “P”
5. On/Off button
6. Blender bottle base ring with stainless
steel blade
7. 600 ml blender bottle
8. Bottle cap with handle
9. Blender bottle mounting socket
CAUTION! The kit does not include a rechargeable battery, USB-A/USB-C type cable
or docking base with charger. For the device to work, it is necessary to purchase a
dedicated rechargeable battery with a USB-A/USB-C type charging cable (CAKU-01
model). Alternatively, you can buy a docking station with a charger (CAKU-02 model).
BEFORE FIRST USE
1. Take the device out of the box and remove all protecting cardboard and foil.
2. Check the device for damage that may have occurred during transportation. If you have any
doubts contact the seller.
3. Thoroughly wash and dry the parts that directly come into contact with food (see section:
“CLEANING AND MAINTENANCE”).
4. Charge the battery until all the battery charge status lights are on
continuously. When fully
charged, 5 lights are lit.
CHARGING THE BATTERY
The battery can be charged in two ways:
Using a USB-A/USB-C type cable connected directly to the battery:
1. Connect the end of the cable (USB-A) to a 5V
⎓
power source equipped with a USB-A port
(such as a phone charger).
2. Connect the other end of the cable (USB-C) to the USB-C port on the battery.
3. During charging, the battery lights will flash. The progress of charging will be indicated by the
lighting of successive lights, full charging will be indicated by the lighting of all 5 lights with a
continuous light.
4. The approximate time for this method of charging, with a current of 2A, is about 3 hours.
Using a dedicated base with CAKU-02 charger (fast charging):
1. Connect the dedicated 12.6V
⎓ 4A
charger to the mains and then to the charging base.
2. Insert the battery into the charging base. Thanks to built-in magnets, the battery installs auto
-
matically when the battery is applied to the charging base.
3. During charging, the battery lights will flash. The progress of charging will be indicated by the
lighting of successive lights, full charging will be indicated by the lighting of all 5 lights with a
continuous light.
Bekijk gratis de handleiding van MPM CMBL-02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MPM |
| Model | CMBL-02 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 14232 MB |
