Mountfield SP555 handleiding
Handleiding
Je bekijkt pagina 21 van 24
FAULT FINDING
A certificate of conformity is enclosed with
the documentation as separate document.
An EXAMPLE is here on the right.
21
CERTIFICATE OF CONFORMITY
PROBLEM SOLUTION
Engine will not start
Check there is ample clean, fresh fuel in the tank
Check the cutter blade is not fouling the ground preventing free rotation.
Engine will not stop
Failure to cut grass
properly
Failure to collect grass
properly
Machine vibrates
excessively
Check the Operator Presence Control (OPC) lever is fully released
Remove spark plug lead to stop the engine using insulated gloves and refer
dealer
Stop the engine and disconnect the spark plug lead using heat resistant
gloves
Check blade attachment bolt is tight
Check condition of blade. If serious worn or damage replace with a new one
Stop the engine and disconnect the spark plug lead using heat resistant
gloves
Check and make sure there is no build up of grass inside the casing
Check grass collector is allowing air to flow through the fabric. If it is clogged
it should be washed carefully
If the grass collector is not clogged raise the height of cut to increase airflow
Check to ensure the engine is running at the correct speed (approximately
3,000rpm)
If conditions are too severe to use the grass collector, remove it and work
with the deflector in position
This will certainly indicate that the blade has become badly damaged. Stop
the engine, disconnect the spark plug lead and examine the balde assembly.
Refer to your local dealer.
EXAMPLE
Bekijk gratis de handleiding van Mountfield SP555, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mountfield |
| Model | SP555 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3412 MB |
