Mount-It! MI-7983 handleiding
Handleiding
Je bekijkt pagina 5 van 9
9
8
• Slide the Left and Right Monitor Arms (#D, F) onto the corresponding ends of the Center Monitor
Arm (#E) and secure them in place using the Bolts (#I) and Washers (#H) on the top and bottom of
each arm as shown here.
Assemble the Monitor Arms
Step 7
Attach the VESA Plates to the Monitors
Step 9
• Select the appropriate size mounting bolt (#M-A through M-D) for your monitors mounting holes and
verify the length of the VESA bolt is not too long. If you are unsure of the correct bolt size for your display
refer to your monitor user manual or contact the monitor manufacturer for sizing information. If necessary,
use the included spacers (#M-F) between the mount and the screen as shown to adjust the length of the
mounting bolt.
• Install the VESA Plate onto the back of the monitor using the selected Bolts (#M-A or M-B) and Washers
(#M-C) and ensure that the arrow on the plate is pointing up to the top of the monitor. Use the Spacers
(#M-F) if needed
• Slide the Monitor Arm onto the column and tighten the bolts shown in the magnification bubble to
secure the arms at the desired height.
Install the Monitor Arm
Step 8
• Slide the monitors into place on the end of the monitor arm brackets. Reinstall the bolts and knobs
removed in Step 6 to secure the monitors in place.
Hang the Monitors on the Arm
Step 10
Bekijk gratis de handleiding van Mount-It! MI-7983, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mount-It! |
| Model | MI-7983 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1359 MB |
