Moultrie Edge Pro handleiding
Handleiding
Je bekijkt pagina 7 van 11
IMPORTANT: (1) Do not mix battery types (Alkaline, Lithium).
(2) Do not use rechargeable AA batteries. Use recommended
AA batteries (Moultrie Alkaline, Energizer Alkaline, Energizer Lithium)
or compatible Edge Series Rechargeable Battery Pack.
ADD CAMERA TO ACCOUNT
• Download the Moultrie Mobile app, and log in or sign up for an account.
• For existing accounts, go to DEVICES > ACTIVATE.
• Scan the QR code on the camera (located inside control panel door).
• Select a monthly or annual plan.
1
2
Scan the QR code to watch a video of the camera overview and
step-by-step instructions for camera setup.
4.CAMERA SETUP
SEE HOW IT’S DONE
Need help?
Call Customer Success: 1-844-908-1219
INSTALL BATTERIES
• Press EJECT to release battery tray.
• Fill tray with either 8 or 16 AA batteries.(Minimum of 8 required)
• If only using 8 batteries, completely fill one side.
• NOTE: When using an external power source it is
recommended to use internal batteries as a backup.
• CAUTION: Battery tray should insert easily when oriented and
aligned properly. Forcing tray into camera can cause damage.
PAIRING YOUR SMARTPHONE
• Press and hold the CONNECT button for 3 seconds to initiate new smartphone pairing.
Live Aim LED will begin flashing while pairing.
3
4
TEST YOUR CAMERA
• Once the camera is on and has connected, use the LIVE AIM feature in the app to ensure
your camera is aimed correctly.
• You can also press the CONNECT button to trigger a test photo. To see the test photo open
the Moultrie Mobile app, go to GALLERY, and pull down to refresh the screen.
• NOTE: For more on monitoring your camera’s status see the Adjust Camera Settings section on page 8.
5
TURN ON YOUR CAMERA
• Slide the power switch to ON. All LEDs will light up and then camera will begin connecting.
NOTE:
• Camera activation and connection should take 5 minutes or less. If a firmware update is available after
connection, LEDs will flash and the camera will power itself off and back on.
• If not connected, you may need to move your camera to a stronger signal area.
• All lights will turn off once the camera is on and connection attempt is complete.
CONNECTING
Flashes yellow
as the camera
connects.
CONNECTED
Turns green
upon successful
connection.
NOT CONNECTED
Turns red if
connection is
not found.
7
3
5
4
2
LIVE AIM
Press once for
test image. Hold
3 seconds to pair
with Smartphone.
LIVE AIM Flashes blue while pairing. Turns solid blue upon successful connection.
• NOTE: Pairing mode initiates and attempts connection for 2 minutes,
then powers off.
Bekijk gratis de handleiding van Moultrie Edge Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Moultrie |
| Model | Edge Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4487 MB |
