Motion CMD-02 handleiding
Handleiding
Je bekijkt pagina 12 van 88
17
17.1
16.1
16.2
16.3
16.4
16
Move the blind to a desired favourite position.
Press the program button on the motor to activate
program mode. The blind starts stepping.
Hold the centre button to save this favourite position. The blind
shortly stops stepping, indicating the favourite position has
been saved succesfully.
Press the program button on the motor to deactivate
program mode. The blind stops stepping.
It is possible to only delete end limits or to do a factory reset.
Factory reset will delete the end limits and remove the connection to any paired remote.
Shortly press the program button on the motor to activate program mode.
Delete end limits: to delete the end limits of the blind, hold the program button
until the blind stops stepping for the first time, and keep holding the button until
the blind stops stepping for the second time. (approximately 10 seconds)
Factory reset: to reset the blind to factory defaults, hold the button for at least 20 seconds. The blind will
stop stepping twice. After the second stop, the blind will give one extra step to confirm factory reset.
Centre
Reset favourite position
Reset the blind
MOTION CMD-02 TUBULAR MOTOR
MOTION CMD-02 TUBULAR MOTOR
Bekijk gratis de handleiding van Motion CMD-02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Motion |
| Model | CMD-02 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6773 MB |
