Mooer Ocean Machine II handleiding
Handleiding
Je bekijkt pagina 26 van 29
23
MIDI
Use this screen to configure settings for MIDI control.
CHANNEL: select one of MIDI channels 1-16 or OMNI.
PC MAP: map PC# to presets to be able to change presets using PC
commands.
CC TABLE: shows a table of CC commands, the functions they control and the respective value ranges.
(See MIDI TABLES.
)
MIDI SYNC: activates / deactivates MIDI clock sync with other devices.
If MIDI SYNC is active, the Master Tap Tempo of the OMII will be synched with the connected MIDI
device.
Reset
This will perform a factory reset of your Ocean Machine II.
x Rotate the Menu knob to select YES.
x Press the Menu knob to perform factory reset.
You will be prompted to press again for confirmation.
Select NO or press the Home button to cancel the factory reset procedure.
Note: A reset will delete your stored presets and set them back to factory settings.
EXPRESSION PEDAL
x An external expression pedal can be used to control various parameters of the Ocean
Machine II.
x Use a 1/4" TRS (stereo) cable to connect an expression pedal to the EXP input of the OMII.
x For best results, use an expression pedal with a maximum potentiometer resistance of
ϭϬŬɏΕϱϬŬɏ
x You can select the parameters which the expression pedal controls on the Exp. screen in the
Settings menu (see section SETTINGS MENU
).
x Please calibrate your expression pedal before you use it for the first time on your OMII.
(See section Calibrate
in the Settings menu)
WIRELESS FOOTSWITCH
The Ocean Machine II supports a wireless footswitch of the MOOER F4 series (to be purchased
separately).
Please consult the manual for the F4 footswitch for battery specs and charging requirements.
Please see section SETTINGS - F4 Pairing
for information about establishing a connection
between OM II and the F4 footswitch.
Once paired, the wireless footswitch will automatically connect to the OMII as soon as both
devices are turned on.
The Ocean Machine II can only be connected to one wireless footswitch at a time.
The F4 wireless footswitch can be used to perform the following functions:
Bekijk gratis de handleiding van Mooer Ocean Machine II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mooer |
| Model | Ocean Machine II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6628 MB |
