Mooer GL100 handleiding
Handleiding
Je bekijkt pagina 24 van 35
21
USAGE SCENARIOS
The LOOPER or DRUM MACHINE features of the GL100 can be used individually, or both at the same
time. When combined, it is important to have them properly synchronized.
The following scenarios illustrate some good ways to use the GL100:
Scenario 1: Phrase Looper alone
Make sure the Drum Machine is not activated before or after recording (DRUM button LED is not lit).
Scenario 2: Drum Machine alone
1. Select an empty storage position and then step several times on the right footswitch to start
the Drum Machine and enter the Tap Tempo at the same time.
Step on the right footswitch again to stop the Drum Machine after it has been running for
some time.
2. Hold down the DRUM button to open the Drum Machine Menu and use single steps on the
right footswitch to turn the Drum Machine on/off.
Note: Tap Tempo input with the right footswitch is not possible when the Drum Machine
menu is opened. Use the TAP button in this case or use the MENU knob / touch screen to
change the menu settings manually.
Scenario 3: Drum Machine and Phrase Looper at the same time
Note: The Drum Machine audio will not be included in the recording. You can later play back the
recorded track without the drums or even use a different drum time signature for playback.
1. Record the phrase loop first and then superimpose the Drum Machine:
a. Find an empty position and select the desired Drum Machine rhythm and tempo.
b. Play and record the phrase loop.
c. When the phrase is played back, the tempo will be automatically adapted according to the
currently selected tempo and time signature.
d. Press the DRUM button to start the Drum Machine and synchronize it with the Looper.
Notes:
This method requires that the content of the playing and the time signature of the drum
pattern selected for the Drum Machine are the same, otherwise the Looper track will not be
guaranteed to be synchronized with the Drum Machine.
Drum machine tempo adaptation applies to phrases with a single or even number of bars.
Phrases with an odd number of bars greater than one will not be guaranteed to play correctly.
An odd number of bars will not guarantee correct tempo adaptation.
This method may result in non-desired tempo values, so please adapt and re-record if
necessary.
2. Recording with count-in
a. In an empty position, press the TAP button several times or adjust the BPM value to enter the
tempo.
b. Press the left footswitch to start recording, a one bar count-in based on the selected time
signature and tempo will be played.
c. Track recording starts automatically after the end of the count-in bar.
d. Watch the flashing of the TAP button LED as a tempo reference for your playing while you are
recording the first layer of the track.
e. During playback following the recording, you can turn the Drum Machine on/off at any time
by pressing the DRUM button.
Bekijk gratis de handleiding van Mooer GL100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mooer |
| Model | GL100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7756 MB |
