Mobotix M73 handleiding
Handleiding
Je bekijkt pagina 73 van 87
security reasons, it is highly recommended to change the default administrator password after the camera
has been configured properly.
Administering the camera: You can modify the camera configuration in the Administration Menu or the
Setup Menu:
n
Admin Menu: This menu contains the basic configuration dialogs of the camera (e.g. passwords, inter-
faces, software update).
n
Setup Menu: This menu contains the dialogs for configuring the image, event and recording para-
meters. Some of these settings can be changed using the corresponding Quick Controls in the Live
screen.
NOTE! For more information, consult the Reference Manual of the camera.
Configuring Sensor Modules
Using different combinations of sensor modules of the MOBOTIX M73 EN54 will have an influence on the dis-
play modes and configuration variants that are available.
An MOBOTIX M73 EN54 will automatically check and verify the installed sensor modules upon its first start
and at every reboot thereafter (e.g., focal length, Day or Night variant). Please note the following:
n
A Thermal Sensor Module , must be attached to connector M1 (Thermal Sensor).
n
If only one sensor module is attached, the camera will behave like a mono camera (i.e., there is no auto-
matic Day/Night switching).
Camera Software in the Browser
Configuring Sensor Modules
73 / 87
Bekijk gratis de handleiding van Mobotix M73, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mobotix |
| Model | M73 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 22000 MB |
