Mitsubishi MR-HS421EX handleiding
Handleiding
Je bekijkt pagina 21 van 24
21
Before use Operation Cleaning Troubleshooting
Troubleshooting (continue)
Problem Check Explanation and Action
Page 14
Page 14
Page 6
Set to “MID or COLDER” or
tothesettingofyourliking.
Is the flow of cold air being blocked?
Are the doors being opened frequently,
or left ajar? Is food blocking them?
Make space between foods and remove any food that
is sticking out of shelves or touching the ceiling of the
drawers. Avoid opening and shutting the door for a while.
Is heat discharging being blocked?
Check if there is no gap around the
refrigerator and the refrigerator is
exposed to direct sunlight.
Is the temperature on the operation
panel set to “COLDER”?
Check that there is enough space around the refrigerator
and that it is properly installed.
Set the temperature to “MID”. Also, the temperature with
each setting may temporarily decrease.
Food in the refrigerator compartment or vegetable case
may freeze. Freezing is less likely when the temperature
settings are set to "LESS COLD".
Has enough time passed after
installation?
It takes 4 to 5 hours for the refrigerator to cool, and may
take 24 hours in summer to fully cool.
Is the temperature setting set to “LESS COLD”?
Place drinks and food containing a lot of water,
such as tofu, vegetables and fruits, at the front of
the shelf or in a door pocket.
Is food with a lot of moisture stored at
the rear of the shelf?
Is the surrounding temperature 5 ™C or
less?
Food freezes in
the refrigerator
compartment and
vegetable case
Does not cool
well
Not much ice is
made
Ice melts
Cooling Performance
Page 14
The refrigerator takes time to cool completely.
Is the select case set to
“SOFT FRZ・COLDER”?
Set the select case to “SOFT FRZ・MID”.
Food appears to freeze in the same way as with
“Freezing”.
Is food piled up in the upper area?
Leave a gap so that cold air can flow to the ceiling and
between food.
Has enough time passed after
installation?
Foods containing a considerable amount of moisture
may freeze too hard. We recommend leaving the food
for about 5 to 15 minutes, placing the other hand on
the back of a knife, and cutting the food by pushing on it.
Also, use the setting “SOFT FRZ・LESS COLD”.
Does the food contain a lot of
moisture?
Is food freezing the same way as with
“Freezing”?
Soft-Freezing
freezes food too
hard
Food in the
select case
melts
Soft-Freezing
Cannot make ice
Water in the tank
stays at the
same level
Has enough time passed after
installation?
It takes 4 to 5 hours for the refrigerator to cool,
and 24 hours or more in summer to make ice.
Has food, the ice server, or another
object been left in the ice storage box?
Also, has the ice been leveled?
Remove food or other objects from the ice storage box.
The ice storage box is judged to be full of ice. Also,
spread the ice out flat all the way to the front.
Is the ice making setting for the ice
making compartment set to “ICE STOP”?
Set the ice making compartment's setting to .
Page 13
Are the water supply pump and tank pipe
installed correctly onto the water tank?
Check that they are correctly installed. In particular,
ensure that the opening of the tank pipe inside the
tank is installed firmly to the tank.
Page 18
Automatic Ice Making
Water tank
or water supply
pipe freezes
Are the water supply pipe and water tank
installed to the refrigerator without any gaps?
Additionally, is the tank pipe installed to
the water tank without any internal gaps?
Check the installation around the water tank.
If there are gaps, the cold air may escape
and water may freeze.
Page 18
Ice is small or
joined together
Has ice been stored inside the ice
storage box for a long time?
Ice stored inside the ice storage box for a long time
may shrink or join together (due to a phenomenon called
sublimation). When not using ice, it is recommended that
you remove the water and stop the ice making.
Does it occur when the water in the
water tank is decreasing?
As the water in the water tank decreases, the amount
of supply water is slightly reduced.
The operation
panel does not
respond
Is lit?
Cancel the Child Safety Lock.
Page 14
Are the user's fingers or the operation
panel wet or dirty?
Wipe off the moisture and dirt on the operation panel
and fingers.
Are you repeatedly touching it?
Let your flnger off the operation panel once and then
touch it again. It will respond when you let you finger off.
Are seals and tapes put on the
operation panel?
Remove the seals and tapes.
Reacts without a
touch
Are there any towels, plastic bags,
papers, etc. over the operation panel?
Remove the towel, plastic bag, paper, etc.
Operation Panel
Bekijk gratis de handleiding van Mitsubishi MR-HS421EX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mitsubishi |
| Model | MR-HS421EX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4766 MB |
