Mitsubishi MFZ-KW25-60VGK handleiding
Handleiding
Je bekijkt pagina 8 van 20
I-SAVE Operation ECONO COOL Operation
Timer Operation (On/O Timer)
• A simplified set back function enables to recall the preferred (preset) setting
with a single push of the
button. Press the button again and you can go
back to the previous setting in an instance.
• I-SAVE operation cannot be set on the weekly timer.
1
Press during cool mode or heat mode to select
I-SAVE mode.
2
Set the temperature, fan speed, airow direction, and 2
ow/1 ow.
• The same setting is selected from the next time by simply pressing
.
• Two settings can be saved. (One for cool mode, one for heat mode)
• Select the appropriate temperature, fan speed, airflow direction, and 2
flow/1 flow according to your room.
• Normally, the minimum temperature setting in heat mode is 16°C.
However, during I-SAVE operation only, the minimum temperature set-
ting is 10°C.
Press again to cancel I-SAVE operation.
• I-SAVE operation also is cancelled when the is pressed.
Note:
Example of use:
1. Low energy mode
Set the temperature 2°C to 3°C warmer in cool mode and cooler in heat
mode. This setting is suitable for unoccupied room, and while you are sleep-
ing.
2. Saving frequently used settings
Save your preferred setting for cool mode and heat mode. This enables you
to select your preferred setting with a single push of the button.
Swing airow (change of air ow) makes you feel cooler than stationary airow.
The set temperature and the airow direction are automatically changed by the
microprocessor.
It is possible to perform cooling operation with keeping comfort.
As a result energy can be saved.
1
Press during cool mode page 5 to start ECONO
COOL operation.
The unit performs swing operation vertically in various cycles according to the
temperature airflow.
Press again to cancel ECONO COOL operation.
• ECONO COOL operation is also cancelled when the is pressed.
1
Press or during operation to set the timer.
(On timer) : The unit turns on at the set time.
(O timer) : The unit turns o at the set time.
*
or blinks.
*
Make sure that the current time and day are set correctly.
Page 4
2
Press (forward) and (backward) to set the
time of timer.
Each press changes the set time 10 minutes forward/backward.
• Set the timer while
or is blinking.
Press
or
again to cancel timer.
Note:
• On and o timers can be set together.
mark indicates the order of timer
operations.
• If power failure occurs while an on/o timer is set, see
page 14 “Auto Restart
Function”.
EN-7
● OPERATING INSTRUCTIONS ●
Bekijk gratis de handleiding van Mitsubishi MFZ-KW25-60VGK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mitsubishi |
| Model | MFZ-KW25-60VGK |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4184 MB |
