Mitsubishi MFZ-KW25-60VGK handleiding
Handleiding
Je bekijkt pagina 12 van 20
Wi-Fi Module Seing Up
Setting up in Access Point mode
Complete the setting up in the Access Point mode within 10 minutes.
To enter the mode
• Hold down the Temperature
for 5 seconds.
• Select “¯ 1” by pressing Temperature
and
as shown on the right.
• Point the remote controller toward the indoor
unit and press the
.
1
Connect your smartphone to the air conditioner.
Make sure that the LED indication is as shown below.
On the Wi-Fi Setting Screen on your smartphone, select SSID and enter
KEY, which are printed on the information label.
Note:
• Check Wi-Fi setting of your smartphone if SSID does not appear on it.
• Enter KEY again if SSID appears on your smartphone, but it cannot connect
to the Wi-Fi module.
• The LED indication does not change or ashes 5 times if connection fails. In
that case, reset connection and set up the Wi-Fi module and the router again.
2
Open Wi-Fi Control App and follow the ‘How to
Setup’ instructions in the ‘Setup Wi-Fi interface’
section.
If the app does not go to this section, you are not
connected to the Wi-Fi interface’s Access Point;
please start process again.
You can either select your available Wi-Fi Net-
work, or manually congure a Wi-Fi Network.
Access Point mode
E.O.
SW
MAC:
ID:
SSID:
KEY:
XXXXXXXXXXXX
XXXXXXXXXX
ME-XXXXXXXXXX
XXXXXXXXXXXX
SSID:
KEY:
ME-XXXXXXXXXX
XXXXXXXXXXXX
Connecting
SmartphoneOtherWi-Fi module
The LED lights up for 3
seconds then ashes once.
A beep sounds as the LED
ashes. This series of actions
is repeated.
3
LED indication will be as shown below when connec-
tion between the Router and Wi-Fi module is complet-
ed and connection to the server starts.
Note:
It may take several minutes to show the indication above.
The LED indication does not change or ashes 5 times if connection fails.
In that case, reset connection and set up the Wi-Fi module and the router again.
SERVER
Connected
Connecting
The LED lights up for 5
seconds and then a beep
sounds for 1 second.
Once registered you will be able to con-
trol your heat pump with your smartphone, tablet
or online account using an internet connection.
(For a list of compatible devices, please visit the Mitsubishi
Electric website).
User Manual
A copy of the user manual, terms & conditions and privacy
policy can be downloaded at any time from the Mitsubishi
Electric website.
Mitsubishi Electric New Zealand
www.mitsubishi-electric.co.nz/wi
Phone: 0800 639 434
Mitsubishi Electric Australia
www.mitsubishielectric.com.au/wi
Phone: 1300 728 119
Register Your Heat Pump(s)
Thank you for choosing a Mitsubishi Electric Heat Pump with Wi-Fi Control.
Once your Wi-Fi interface is installed, either download the app (search term:
Mitsubishi Wi-Fi Control) or visit our website to register your heat pump(s).
*Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc., registered in
the U.S. and other countries.
*Google Play and the Google Play logo are trademarks of Google Inc.
Mitsubishi Electric Wi-Fi Heat Pump Control
EN-11
● OPERATING INSTRUCTIONS ●
Bekijk gratis de handleiding van Mitsubishi MFZ-KW25-60VGK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mitsubishi |
| Model | MFZ-KW25-60VGK |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4184 MB |
