Mitsubishi MFZ-KW25-60VGK handleiding
Handleiding
Je bekijkt pagina 11 van 20
Wi-Fi Module Seing Up
This Wi-Fi module, communicates the status information and controls the com-
mands from Wi-Fi Control App by connecting to an indoor unit.
Setting up in WPS-PUSH mode
To enter the mode
• Hold down the Temperature
for 5 seconds.
• Select “¯ 2” by pressing Temperature
and
as shown on the right.
• Point the remote controller toward the indoor
unit and press the
.
1
Connect the Router to the air conditioner.
Make sure that the LED indication is as shown below.
Push WPS button of the Router within 2 minutes after the mode selec-
tion has completed.
The WPS-PUSH mode will return to initial state if WPS button is not
pressed for 2 minutes.
2
LED indication will be as shown below when connec-
tion between the Router and Wi-Fi module is complet-
ed and connection to the server starts.
If the indication LED does not change or ashes 5 times, connection fails.
Please reset connection and setup the Wi-Fi module and the Router again.
Main Causes that WPS failed are as follows.
Communication distance (from the Wi-Fi module to Router), Router settings
(encryption, authentication, limit of connections, etc.)
WPS-Push mode
Connecting
Router
The LED lights up for 3
seconds then ashes twice.
A beep sounds as the LED
ashes. This series of actions
is repeated.
Connected
Connecting
SERVER
The LED lights up for 5
seconds and then a beep
sounds for 1 second.
Setting up
Set up a connection between the Wi-Fi module and the router.
Note:
Setup is possible only after operating the air conditioner using the wireless re-
mote controller.
Download and install Wi-Fi Control App to your
compatible Apple or Android smartphone/tablet
(search term: Mitsubishi Wi-Fi Control).
Selecting a mode
The Wi-Fi module has to be paired with the Router in order for communication
between the indoor unit and Wi-Fi Control App to begin. There are 2 methods of
pairing the Wi-Fi module with the Router:
• WPS-PUSH mode
• Access Point mode
The mode to be set depends on whether your Router has the WPS button.
Please use the pairing mode most suitable for your system.
Follow the instructions below to set the pairing mode with Remote controller.
Set up the Wi-Fi module and the Router again when the Router has been replaced.
Note:
To reset connection and set up the Wi-Fi module and the router again
• Hold down the Temperature
for 5 seconds.
• Select “_ 2” by pressing Temperature
and
.
• Point the remote controller toward the indoor
unit and press the
.
• The indoor unit beeps 3 times when resetting
is complete.
EN-10
Bekijk gratis de handleiding van Mitsubishi MFZ-KW25-60VGK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mitsubishi |
| Model | MFZ-KW25-60VGK |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4184 MB |
