MIPRO ACT-800H handleiding
Handleiding
Je bekijkt pagina 14 van 20
Handheld Wireless Microphone
13
All rights reserved. Do not copy or forward without prior approvals of MIPRO.
Specifications and design subject to change without notice. YM 023/02
(E) Error Codes:
(1) ERR no01 → EEPROM Channel wasn't
programmed or internal data error.
(2) ERR no02 → for testing only.
(3) ERR no03 → the set frequency exceeds the
upper band. The transmitter frequency will
not be changed but it can be operated as
long as the power switch is turned on again.
(4) ERR no04 → the set frequency exceeds the
lower band. The transmitter frequency will
not be changed but it can be operated as
long as the power switch is turned on again.
(F) GROUP CHANNEL: The preset frequency of the
receiver.
(G) Displays “CHANNEL” only: User-defined
frequency of receiver and needs to be changed
via PC.
(C) RF POWER: Select RF-HI or RF-LOW.
RF POWER
RF-HI
RF POWER
RF-LOW
(D) MUTE MODE:
(3) DISABLE: MUTE button is disabled.
Mute setting is canceled.
(1) Select MANUAL or DISABLE.
(2) MANUAL: Use MUTE button to mute/unmute.
MUTE MODE
MANUAL
MUTE MODE
DISABLE
Bekijk gratis de handleiding van MIPRO ACT-800H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MIPRO |
| Model | ACT-800H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1404 MB |
