MIPRO ACT-800H handleiding
Handleiding
Je bekijkt pagina 12 van 20
Handheld Wireless Microphone
11
All rights reserved. Do not copy or forward without prior approvals of MIPRO.
Specifications and design subject to change without notice. YM 023/02
3 240H/ACT-580H. ACT- LCD:
(1) Group / Channel / ID Code messages are
displayed only and cannot be changed.
(2) To change Group / Channel / ID Code, do it at
the receiver and then press ACT button to sync.
GR (Group) – CH (Channel) – ID (ID Code):
Group-Channel-ID Code
(3) ACT-240H: GROUP A, CH 1~12, ID 1~64.
ACT-580H: GROUP A, B1, B2, CH 1~12,
ID 1~64, and pairing mode.
P
A
05-03
GR-CH-ID
(H) Error codes:
(1) ROM-ER → Channel wasn't programmed or
internal data error.
(2) ERROR1 → RF frequency targeting circuitry
is failed.
(3) NO----03 → The set frequency exceeds the
upper band. The transmitter frequency will
not be changed but it can be operated as
long as the power switch is turned on again.
(4) NO----04 → The set frequency exceeds the
lower band. The transmitter frequency will
not be changed but it can be operated as
long as the power switch is turned on again.
Bekijk gratis de handleiding van MIPRO ACT-800H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MIPRO |
| Model | ACT-800H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1404 MB |
