Minolta RD-175 handleiding
Handleiding
Je bekijkt pagina 11 van 34
RD-175 Digital Camera
11
3.2 Setting the power supply for the terminator
The RD-175 Digital Camera features only one SCSI port and is thus always
the last device in the SCSI chain. The power supply for the terminator is
provided by the computer if the computer is a desktop PC. If you use a
laptop, please note the following information so that the power can be
supplied to the terminator via the internal battery:
c Press the MODE key and keep it pressed.
d Slide the master switch to ON. If the master switch was already set to ON,
slide it back to LOCK, wait 30 seconds and then slide it back to ON.
Kamera3.bmp
You will see “SCSI” at the bottom right on the display. The SCSI ID is
shown at the top on the display.
e Keeping the MODE key pressed, press the Program-Select key (P)
Kamera4.bmp
The terminator power supply is shown on the display
f Release the MODE key. Power is now supplied to the terminator via the
internal battery. Please follow precisely the same procedure in order to
switch the power supply back to your PC.
Bekijk gratis de handleiding van Minolta RD-175, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Minolta |
| Model | RD-175 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2236 MB |
