Minolta RD-175 handleiding
Handleiding
Je bekijkt pagina 10 van 34
RD-175 Digital Camera
10
3. Preparing the RD-175 Digital Camera
3.1 Selecting the SCSI ID
The RD-175 Digital Camera is set at the factory to SCSI ID 6 but may be
set to another ID if necessary:
c Press the MODE key on the camera and keep it pressed.
d Slide the master switch to ON. If the master switch was already set to ON,
slide it back to LOCK, wait 30 seconds and then slide it back to ON.
Kamera1.bmp
You will see “SCSI” at the bottom right on the display. The SCSI ID is
shown at the top on the display. If SCSI ID 6 is not yet in use by another
device, please skip the steps below.
e Keeping the MODE key pressed, switch the SCSI ID to an ID setting not yet
used with the function selector (thumbwheel beneath the shutter release).
Kamera2.bmp
f Release the MODE key. You have now set the SCSI ID.
Bekijk gratis de handleiding van Minolta RD-175, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Minolta |
| Model | RD-175 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2236 MB |
