Minolta DiMAGE Scan Multi PRO Handleiding (129 Pagina's)

Handleiding

Multi-format attachment (sold separately, HA-P3)

Purchasing the Multi-format attachment,

sold separately, will enable you to deal with

a wider range of films such as a 16mm film.

Multi-format attachment (HS-P1)

The following contents should be included in

this package. If there is an article of inferior

quality or parts missing, please contact the sales agent.

Multi-format attachment (cover part)

Multi-format attachment (bottom)

3 film masks

1. Place the attachment at the position

on the holder that is suited for the

attachment you selected and fix it

while aligning with the two grooves

on the left side until it clicks.

If the 120/220 film attachment with glass

(HA-P1) or glassless (HA-P2) is installed,

remove it beforehand.

2. Fit the two pins on the upper side of

the film cover into the holes on the

upper side of the holder until they

click.

36

3. Make appropriate mask for the size of the film.

When making a mask, cut out the sheet with a cutter, etc.

using the scales drawn on the mask as a guide to a size

not larger or wider than the actual film. If you use a larger

or wider mask when scanning, the auto exposure function

may not be performed.

4. Insert the mask you have cut out.

Fix the mask with the scale side facing

up inti the slot on the lower side of the

holder and then fit the holes on to the

two pins on the upper side of the

holder.

Before inserting a film, remove dust,

etc. from the film, holder, attachment or

mask using a blower brush, etc.

LOADING THE FILM HOLDER

Bekijk gratis de handleiding van Minolta DiMAGE Scan Multi PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.