Minolta DiMAGE Scan Multi PRO Handleiding (129 Pagina's)

Handleiding

DiMAGE Scan Multi PRO 35

120/220 (6x4.5, 6x6, 6x7, 6x8, 6x9) glassless film

attachment (HA-P2)

1. Install the selected attachment on

the holder.

Place the attachment with the button

side up at the position on the holder

that is suited for the attachment you

selected and fix it aligning with the two

grooves on the left side until it clicks.

If the 120/220 film attachment with

glass (HA-P1) or the multi-format

attachment (HA-P3) is installed, remove

it beforehand.

2. Press the button on the

attachment to open the film cover.

3. Adjust the position of the slide bars to fit the size

of the film.

• The position for scanning is on the

right side when facing the holder.

Align the film to the right side of the

frame. The scanning position will be

determined by the film format

selected on the main window.

• Adjust the slide bars to determine the

mounting position of the left side of

the film. There are white markings on

the slide bar, one on the bottom of

the attachment and in two places on

the cover. Set the position using

these markings.

4. Place the film on to the

attachment, emulsion side down,

after adjusting the position of the

mount and film frame you wish to

scan.

Before inserting a film, remove dust,

etc. from the film, holder or attachment

using a blower brush, etc.

5. Close the film cover of the holder

until it clicks.

Removing a Film

While pressing the button on the lower side of the attachment,

lift the film cover.

Removing an Attachment

While sliding the lever on the middle part of the holder to the

right, lift the attachment.

LOADING THE FILM HOLDER

Bekijk gratis de handleiding van Minolta DiMAGE Scan Multi PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.