Minolta Dimâge Scan Dual I handleiding
Handleiding
Je bekijkt pagina 9 van 68
Dimâge Scan Dual
7
CONNECTING THE HARDWARE
3. Plug the other end of the SCSI cable) into the
back of the scanner.
• Either SCSI port can be used, there is no dedicated in or out port.
1. Place the scanner on a level surface.
2. Plug the SCSI cable SC-11 into the SCSI port on
the rear of the PC.
Connecting the SCSI Cable
The SCSI cable SC-11 (DB25-to-SCSI-1) has been packaged with the Dimâge Scan Dual. See
your dealer if you require a different SCSI cable.
• To meet FCC regulations, the SCSI cables used with this scanner must be equipped with ferrite cores.
BEFORE YOU BEGIN…
TURN THE COMPUTER AND ALL CONNECTED
DEVICES OFF.
Bekijk gratis de handleiding van Minolta Dimâge Scan Dual I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Minolta |
| Model | Dimâge Scan Dual I |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10315 MB |
