Miniland Digital camera 2.4" handleiding
Handleiding
Je bekijkt pagina 17 van 56
ENGLISH
17
Note 2: Each camera can be linked just with one monitor at a time.
Nota 3: If, for any reason, the camera and monitor were not paired at the factory, you
will need to perform the pairing manually by adding the camera as indicated above.
To exit the function, you can do so as follows:
1. Press the Menu/Back/Power button (5).
2. Do not touch the monitor for 30 seconds.
5.2.4. DELETE CAMERA
To delete one of the connected cameras, follow the next steps:
1. Press the Menu/Back/Power button (5) to display the menu icon.
2. Press the RIGHT Nav button (10) or LEFT Nav button (8) until the camera icon is
highlighted, and then press the UP Nav button (7) or DOWN Nav button (11) until the
"del" sub-menu is selected. Enter this option by pressing the confirmation button (9).
3. Press the UP Nav button (7) or DOWN Nav button (11) to select the camera you want
to delete and press the Confirmation button (9).
To exit the function, you can do so as follows:
1. Press the Menu/Back/Power button (5).
2. Do not touch the monitor for 30 seconds.
Note: A channel needs to be deleted before pairing to a new camera unit.
5.2.5. CHOOSING THE CAMERA
This product is designed to allow the observation of different areas with up to 4 cameras.
To choose the camera you want to see, follow the next steps:
1. Press the Menu/Back/Power button (5) to display the menu icon.
2. Press the RIGHT Nav button (10) or LEFT Nav button (8) until the camera icon is
highlighted, and then press the UP Nav button (7) or DOWN Nav button (11) until the
"view" sub-menu is selected. Enter this option by pressing the confirmation button (9).
3. Press the UP Nav button (7) or DOWN Nav button (11) to select the camera you want
to view (Camera 1, Camera 2, Camera 3, Camera 4).
4. Press the Confirmation button (9) to go to the selected camera.
To exit the function, you can do so as follows:
1. Press the Menu/Back/Power button (5).
2. Do not touch the monitor for 30 seconds.
Note: The baby monitor reference compatible with this additional camera is 89591
digimonitor 2.4''
5.2.6. SCAN MODE
This function automatically cycles through your paired camera channels to display each
camera for 15 seconds. This function can be used only when you have more than 1 camera
unit paired. To enter in this mode:
1. Press the Menu/Back/Power button (5) to display the menu icon.
2. Press the RIGHT Nav button (10) or LEFT Nav button (8) until the camera icon is
highlighted, and then press the UP Nav button (7) or DOWN Nav button (11) until the
"scan" sub-menu is selected.
3. Press the Confirmation button (9).
Note: If one of the cameras is out of range or not turned on, the monitor will notify
you and the scan mode will stop, indicating an out-of-range warning on the screen.
Bring the monitor closer to the camera or turn on the camera, and the scan mode
will be activated again, allowing you to view both cameras. To deactivate this mode,
select the desired camera by following the steps in section 5.2.5.
Bekijk gratis de handleiding van Miniland Digital camera 2.4", stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miniland |
| Model | Digital camera 2.4" |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 5200 MB |
