Milwaukee M18 Fuel HAMMERVAC 2908-DE handleiding

Niet gecategoriseerd

Milwaukee

16 pagina's

PDF beschikbaar

Handleiding

MAINTENANCE

WARNING

To reduce the risk of

injury, always unplug

the charger and remove the battery pack from

the charger or tool before performing any main-

tenance. Never disassemble the battery pack,

charger, or tool, except as provided in these in-

structions. Contact a MILWAUKEE service facil-

ity for all other repairs.

Do not use tool without dust box and HEPA lter

in place.

Maintaining Filter

Keep lter clean. Empty debris by holding away from

the user’s face and tapping dust box into a trash can,

pail, or other reasonable container. Pull the HEPA

lter away from the dust box and tap clean. Do not

clean with water or compressed air. After about 1500

holes or loss of suction, discard and replace HEPA

lter (Cat. No. 49-90-0910).

Maintaining Tool

Keep this tool, battery pack and charger in good

repair by adopting a regular maintenance program.

Inspect the tool for issues such as undue noise,

misalignment or binding of moving parts, breakage

of parts, or any other condition that may a󰀨ect the

tool operation. Return the tool, battery pack, and

charger to a MILWAUKEE service facility for repair.

Depending on use, periodically have an authorized

service facility inspect and maintain the tool, battery,

and charger to ensure proper performance.

If the tool does not start or operate at full power with

a fully charged battery pack, clean the contacts on

the battery pack. If the tool still does not work prop-

erly, return the tool, charger and battery pack, to a

MILWAUKEE service facility for repairs.

WARNING

To reduce the risk of

personal injury and

damage, never immerse a tool, battery pack or

charger in liquid or allow a liquid to ow inside

them.

Cleaning

Clean dust and debris from any vents. Keep tool

clean, dry and free of oil or grease. Use only mild

soap and a damp cloth to clean, since certain clean-

ing agents and solvents are harmful to plastics and

other insulated parts. Some of these include gasoline,

turpentine, lacquer thinner, paint thinner, chlorinated

cleaning solvents, ammonia and household deter-

gents containing ammonia. Never use ammable or

combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and charger

to the nearest authorized service center.

ACCESSORIES

WARNING

Use only recommend-

ed accessories. Oth-

ers may be hazardous.

For a complete listing of accessories, go online to

www.milwaukeetool.com or contact a distributor.

OPERATION

WARNING

To reduce the risk of

re and injury, do not

use to pick up ammable or combustible materi-

als. Empty dust box completely before use.

To reduce the risk of injury, always wear proper

eye protection marked to comply with ANSI Z87.1.

When working in dusty situations, wear appro-

priate respiratory protection or use an OSHA

compliant dust extraction solution.

Always remove battery pack before changing

or removing accessories. Only use accessories

specically recommended for this tool. Others

may be hazardous.

Proper Operation

1. WARNING! Remove battery to avoid starting the tool.

2. Empty the dust box.

NOTE: For optimal use to remove debris in the

dust box, connect a hose to a vacuum and remove

debris.

3. Fit the HAMMERVAC™ to the tool and bit.

4. Set the drill depth.

5. Install the battery pack.

6. Pull trigger to start HAMMERVAC™.

7. Begin use according to tool manufacturer instructions.

8. Always hold the tool securely using both handles

to maintain control.

9. Stop and empty dust box:

• When suction decreases,

• When dust begins to come through the nozzle

bit brush,

• When dust covers the lter in the visible dust box.

NOTE: Empty the dust box often. When suction

decreases, press the lter cleaning lever 3-5 times

to improve suction.

Bekijk gratis de handleiding van Milwaukee M18 Fuel HAMMERVAC 2908-DE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.