Milwaukee M18 3019-21PS handleiding
Handleiding
Je bekijkt pagina 8 van 24
8
MAINTENANCE
WARNING
To reduce the risk of injury, al-
ways unplug the charger and
remove the battery pack from the charger or tool
before performing any maintenance. Never disas-
semble the battery pack, charger, or tool, except
as provided in these instructions. Contact a
MILWAUKEE service facility for all other repairs.
Maintaining Tool
Keep this tool, battery pack and charger in good
repair by adopting a regular maintenance program.
Inspect the tool for issues such as undue noise,
misalignment or binding of moving parts, breakage
of parts, or any other condition that may aect the
tool operation. Return the tool, battery pack, and
charger to a MILWAUKEE service facility for repair.
Depending on use, periodically have an authorized
service facility inspect and maintain the tool, battery,
and charger to ensure proper performance.
If the tool does not start or operate at full power with
a fully charged battery pack, clean the contacts on
the battery pack. If the tool still does not work prop-
erly, return the tool, charger and battery pack, to a
MILWAUKEE service facility for repairs.
WARNING
To reduce the risk of personal
injury and damage, never im-
merse a tool, battery pack or charger in liquid or
allow a liquid to ow inside them. Do not use
bleach as a cleaning agent.
Cleaning Electrical Contacts
Keep electrical contact posts between bottom of
tank and base clean. WARNING! Remove tool's
battery pack to avoid starting the tool before clean-
ing electrical contacts. Clean contacts with a dry,
clean cloth only.
Tank
Contacts
Base
Cleaning
Clean dust and debris from any seals and gaskets.
Keep tool clean, dry and free of oil or grease. Use
only mild soap and a damp cloth to clean, since
certain cleaning agents and solvents are harmful to
plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia and
household detergents containing ammonia. Never
use ammable or combustible solvents around tools.
WARNING
To reduce the risk of injury, al-
ways wear personal protective
equipment (PPE) according to the chemical
manufacturer's instructions. Always wear eye
protection.
Draining and Cleaning the Tank, Hose,
and Spray Wand
If there is any liquid left in the tank after spraying,
the tank should be drained before cleaning. Do not
store chemicals in the tank. Tank must be cleaned
before using another liquid. Do not mix liquids. Follow
the chemical manufacturer’s instructions for proper
cleaning, storage and/or disposal of excess liquid.
To drain:
1. Ensure the battery door is closed securely.
2. Remove the tank from the base.
3. Empty the tank into a suitable container through
the ll area. WARNING! Always wear personal
protective equipment (PPE) according to the
chemical manufacturer's instructions. Always wear
eye protection.
To clean:
1. Ensure the battery door is closed securely.
2. Remove the tank from the base and set on a level
surface away from the base to prevent exposing
the base to harsh chemicals.
3. Remove the tank and ll it about one-third full with
clean water. A small amount of mild household
detergent may be added. Replace the cap and
gently slosh the water around the tank.
4. Install the tank and spray the water until the tank
has been emptied. Make sure to direct the spray
toward an area that will not be damaged by residue
chemicals in the tank.
5. Repeat the procedure with clean water until the
tank is thoroughly clean. Wash outside of nozzles
and dry with cloth.
6. Remove the pump lter that is located at the bot-
tom of the tank. To unlock, turn counterclockwise
for a quarter of a turn.
7. Rinse the lter with clean water and mild house-
hold detergent. Wipe o with a dry, clean cloth.
8. When dried, the pump lter should be reinserted
into the pump, making sure it is at against the
bottom of the tank. Lock the lter with a quarter
turn clockwise.
9. Wipe the outside of the tank with a clean,
dry cloth.
10. Allow all pieces to completely dry before reinstall-
ing parts and storing the unit. Always reinsert
strainer before replacing tank cap.
Storage
Store indoors. Store spray wand securely in wand
storage area. Store the sprayer in a secure, well-
ventilated indoor space with the tank empty.
Repairs
For repairs, return the tool, battery pack and charger
to the nearest authorized service center.
ACCESSORIES
WARNING
Use only recommended acces-
sories. Others may be hazard-
ous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
Bekijk gratis de handleiding van Milwaukee M18 3019-21PS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Milwaukee |
| Model | M18 3019-21PS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4434 MB |
