Milwaukee M12 2472-20 handleiding
Handleiding
Je bekijkt pagina 5 van 16
5
MAINTENANCE
WARNING
To reduce the risk of injury, always
unplug the charger and remove the
battery pack from the charger or tool before
performing any maintenance. Never disassemble
the battery pack, charger, or tool, except as pro-
vided in these instructions. Contact a MILWAUKEE
service facility for all other repairs.
Maintaining Tool
Keep this tool, battery pack and charger in good
repair by adopting a regular maintenance program.
Inspect the tool for issues such as undue noise,
misalignment or binding of moving parts, breakage
of parts, or any other condition that may aect the
tool operation. Return the tool, battery pack, and
charger to a MILWAUKEE service facility for repair.
Depending on use, periodically have an authorized
service facility inspect and maintain the tool, battery,
and charger to ensure proper performance.
If the tool does not start or operate at full power with
a fully charged battery pack, clean the contacts on
the battery pack. If the tool still does not work prop-
erly, return the tool, charger and battery pack, to a
MILWAUKEE service facility for repairs.
WARNING
To reduce the risk of personal in-
jury and damage, never immerse a
tool, battery pack or charger in liquid or allow a
liquid to ow inside them.
Cleaning
Clean dust and debris from any vents. Keep tool
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use ammable or
combustible solvents around tools.
Repairs
For repairs, return the tool, battery pack and charger
to the nearest authorized service center.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST (1.800.729.3878)
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit www.milwaukeetool.com
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
Become a Heavy Duty Club Member at
www.milwaukeetool.com to receive important
notications regarding your tool purchases.
WARNING
To reduce the risk of injury, always
move blade to the fully closed
position before storing and any time the tool is
not in use.
Only cut recommended materials (see "Speci-
cations"). Do not attempt to cut other materials.
Cutting Tips
• Use low speed and cut further in from the end of
the material to avoid crooked cuts,.
• Do not attempt angled cuts. It will damage the blade.
Hold the material squarely between the blades.
• Cut clean material to extend the blade life. Wipe
dirt and debris from material and blades before
beginning the cut.
Jam Release
If the blade becomes jammed in the material, all fuel
gauge LEDs will blink. Follow these steps in order
until the jam is released.
1. Move the speed control switch to "1" and attempt
to complete the cut. If unsuccessful.
2. Move the speed control switch between "1" and
"2" several times back and forth. Pull the blade
release lever. If the jam is not released.
3. Remove the battery pack, then use the hex wrench
to loosen the blade release bolt. Loosen the bolt
until the bolt collar is free of the blade. Pull the
blade release lever. Be sure to securely tighten
the blade bolt before continuing work. If the jam
is not released.
4. Remove the upper blade bolt. Be sure to securely
tighten the upper blade bolt before continuing work.
Troubleshooting
LED Indication Cause
4 LEDs
ash, tool
shuts o
Overload too large cable/capacity
incorrect material
dull blades
blade jam
1 LED
ashes
Low battery Battery is nearing its
end of charge
APPLICATIONS
WARNING
To reduce the risk of electric shock,
check work area for hidden pipes
and wires before drilling or driving screws.
Bekijk gratis de handleiding van Milwaukee M12 2472-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Milwaukee |
| Model | M12 2472-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2925 MB |
