Milesight MS-C2964-PD handleiding
Handleiding
Je bekijkt pagina 91 van 237
Milesight Network Camera User Manual | 5 - System Operation Guide | 91
Parameters Function Introduction
IP Address
Subnet Mask
Display the IP Address, Subnet Mask, Gateway and DNS Address of the current
network. If the SIM card is not inserted or not recognized, it will display 0.0.0.0.
Gateway
DNS Address
Display the IP Address, Subnet Mask, Gateway and DNS Address of the current
network. If the SIM card is not inserted or not recognized, it will display 0.0.0.0.
Data Usage Monthly Display current monthly used data.
Click this button to manually refresh the above status.
Step 3:Set the schedule, the 5G network will take effect according to the schedule you set.
Step 4:After configuring the cellular settings, you also need to complete other basic configurations of
the camera if needed, such as events, recordings, etc.
Step 5:After completing the basic settings of the camera, you can access the camera using 5G
network without connecting the network cable.
Note:
• Currently you can use 5G network to connect the 5G camera to Milesight VMS Enterprise,
Milesight CMS and M-sight ProAPP via P2P.
•
For 5G camera, the P2P function will be activated by default as shown below.
Bekijk gratis de handleiding van Milesight MS-C2964-PD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Milesight |
| Model | MS-C2964-PD |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 42995 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, White |
| Soort | IP-beveiligingscamera |
| Internationale veiligheidscode (IP) | IP67 |
| Maximale capaciteit van de geheugenkaart | 256 GB |
| Vormfactor | Rond |
