Miele G 5811 SC Active Plus handleiding
Handleiding
Je bekijkt pagina 75 van 88
Problem solving guide
75
Problem Cause and remedy
The dishwasher stops
during a programme.
Fault number 8 ap-
pears in the time display.
A technical fault has occurred.
Switch the dishwasher off.
Close the stopcock.
Call the Miele Customer Service Department.
Water drainage fault
Problem Cause and remedy
The dishwasher stops
during a programme.
The / indicator
light is flashing.
Fault number appears
in the time display.
Before rectifying the problem:
Switch the dishwasher off.
Water drainage fault.
There might be water in the wash cabinet.
Clean the filter combination (see “Cleaning and care
– Cleaning the filters”).
Clean the drain pump (see “Cleaning and care –
Cleaning the drain pump”).
Remove any kinks or loops in the drain hose.
General problems with the dishwasher
Problem Cause and remedy
The indicator lights and
display are dark.
The dishwasher has switched off automatically to save
energy.
Switch the dishwasher on again with the button.
Detergent residue is left
in the detergent com-
partment at the end of a
programme.
The detergent compartment was still damp when de-
tergent was added.
Only add the detergent when the detergent com-
partment is dry.
The detergent compart-
ment lid cannot be
closed.
Residual detergent is blocking the catch.
Remove the residual detergent.
At the end of a pro-
gramme there is a film of
moisture on the inside of
the door and possibly on
the interior cabinet
walls.
This is part of the normal function of the drying sys-
tem. The moisture will dissipate after a short while.
Bekijk gratis de handleiding van Miele G 5811 SC Active Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | G 5811 SC Active Plus |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9229 MB |
