Handleiding
Je bekijkt pagina 14 van 18
Installation Steps
Step 1. Remove the front panel and the air filter
1. Hold the slot under the front panel, then uplift it outwards, and remove the front panel
(See Fig.1).
2. Pinch the handle under the air filter and make the air filter arched, remove it from the
slot from underside to upside (See Fig.2).
Step 2. Remove the frame.
Remove the two fixed screws from the frame. (see Fig.3)
Grasp the left corner in the frame's underside, the loosen the frame. (see Fig.4)
1.
2.
4
66
5
1111
SEAL
RUBBER
PLUG
You can choose back drainage (on models with back
drain hole).
See the following procedures to perform back drainage:
1. Fit the seal onto the drain joint (which provided with
your air conditioner accessory).
2. Remove the rubber plug from the back of the unit.
(If applicable),and insert the rubber plug(on some
models the rubber plug provided with your air
conditioner accessory) into the bottom drain hole
of the unit.
3. Attach the drain joint to the back of the cabinet
O
where you remove the plug and rotate 90 to
securely assemble them.
DRAIN
JOINT
4. Connect the drain joint with a extension drain hose
(Locally purchased)
Bekijk gratis de handleiding van Midea MWF-25CMN1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MWF-25CMN1 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 1690 MB |
