Handleiding
Je bekijkt pagina 13 van 44
12
Mark Points:
●
●
●
●
●
●
Mark a point (1) on the horizontal line A, 3.15" to the vertical reference line.
Repeat this operation on the other side and on the vertical reference line, checking that
the three marks are leveled.
Mark a point (2) on the horizontal line B, 2.36" to the vertical reference line.
Repeat this operation on the other side, checking that the two marks are on the same
horizontal line.
Mark a point (3) on the horizontal line C, 3.94" to the vertical reference line . Repeat
this operation on the other side , checking that the two marks are leveled.
●
●
●
●
Fix the brackets :
Right
Wrong
Drill holes at the marked points with a Φ10 mm drill bit.
Insert the Wall Plugs 11 into the holes.
Fix the hood fixing bracket 20 with 3 screws 10 (5 x 50) at the horizontal line A.
Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) at the horizontal line B.
●
Lower decorative chimney :
Fix the exhaust pipe on the hood body,
connect chimney and hood body with 2
screws 12. connect chimney fixing bracket
and chimney with 2 screws 12.
4Screws(ST4.2*9.5)
●
●
●
Hang and Mount the Vent Hood:
Hang the vent hood onto fixing bracket 20.
Level the hood, and insert 2 long screws (10) into bracket 21 at level B.
Insert 2 long screws (10) into the hood at level A.
●
IMPORTANT
The vent hood should be lifted and installed by 2 people to prevent injuries and
potential damage.
Bekijk gratis de handleiding van Midea MVT30W9AST, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MVT30W9AST |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 2812 MB |
