Midea MLTW42A2BWW handleiding
Handleiding
Je bekijkt pagina 26 van 81
26
Run a test cycle
Run a test cycle to make sure that your washer is properly installed.
1. Load about 6 pounds (2.7 kg) of laundry into the tub.
2. Select the Cycles knob to turn on your washer.
3. Turn the cycle selector to select the Rinse & Spin cycle.
4. Press the Start Pause button to start the test cycle. Your washer
should not rock or vibrate excessively when water fills the tub or
when washing or spinning. The washer should drain well during the
spin cycle.
Caution
• If you detect any water leaks while the washer is filling or draining,
check the water connections. See Connecting the water hoses on
page 19 or Connecting the drain hose on page 22.
•
If the washer rocks and/or vibrates excessively, level it again. See
Level your washer.
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Care
Troubleshooting
Washer Use
energized.
Bekijk gratis de handleiding van Midea MLTW42A2BWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MLTW42A2BWW |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 9217 MB |
