Midea MKE15H2ADW handleiding
Handleiding
Je bekijkt pagina 11 van 84
08
Boil Water to Set Temperature
1. Press the lid opening button to open the lid.
2. Pour the required water into the pot ( the amount of water
between the minimum and maximum ).
3. Cover the lid and plug it into an electrical outlet.
4. Press to select the temperature, and Press within 3
seconds to start the work.
5. After heating to the select temperature, the buzzer will sound 3
times and the work will end.
6. Then kettle will enter the standby mode.
Use Your Kettle
· When the power is turned on, the buzzer will beep once, the indicator light and
display will all light up for about 1 second, then it will enter standby mode, and the
current water temperature will be displayed;
· 5 minutes (± 20s) without key operation, enter the shutdown mode.
NOTE
Tip:
· Eexcept for 100°C, the set temperature can be adjusted by short pressing the
button again during operation of other temperature levels. The set temperature can be
cycled among 45, 60, 70, 85, 90, 95 and 100.
Boil Water Function
1. Press the lid opening button to open the lid.
2. Pour the required water into the pot ( the amount of water
between the minimum and maximum ).
3. Cover the lid and plug it into an electrical outlet.
4. Press the button to boil water.
5. After heating to 100°C (boiling), the buzzer will sound 3
times and the work will end.
EN
Bekijk gratis de handleiding van Midea MKE15H2ADW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MKE15H2ADW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4680 MB |
