Midea MF100T80B handleiding
Handleiding
Je bekijkt pagina 9 van 37
4 FACTORY PATTEN DETECTION
LED
Display
Check
Target
Check Method Check Item
t01
Version
switchover
1. Press [K5] button
2. Press [K2] to change version
3. Press [K1] button continuously for
3s to confirm your change
LED displays“0xx”
x means current
version
t02
Error code
checking
1. Press [K5] button
2. Press [K1] to show the last code and press
[K2] to show the next code
3. Press [K2] and [K3] button at the same
time continuously for 3s, after hearing the
beep, all the error codes records deleted,
LED displays E00.
LED displays
“Err”
t03
Version
information
checking
1. Press [K5] button Enter into service mode,
LED displays “cod”.
2. Press [K5], LED displays project number.
3. Press [K1] button, LED displays version
number
LED displays version
number
t04
UI Checking Press [K5] button
The whole LED
display flashes
t05
Drain-pump
checking
Press [K5] button to drain out all the
remaining water. If all water drained out, LED
displays “EP”，and 6 minutes later ,if there is
still water remains in it, LED displays “FP”
LED displays “PPt”
t06
Pressure switch
checking
1. Press [K5] button to activate inlet valve.
LED displays level frequency once water
lever get the main wash level.
LED displays LL
8
4.1. Service mode
Bekijk gratis de handleiding van Midea MF100T80B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF100T80B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12500 MB |
