Midea MF100T80B handleiding
Handleiding
Je bekijkt pagina 10 van 37
9
LED
Display
Check
Target
Check Method Check Item
t07
Water
temperature
sensor and
heater checking
Press [K5] button to activate the main inlet
valve and get the water lever to heating level
then turn on the heater and 5 mins later
turned off automatically
LED displays the
current temperature
t08
Inlet valve
checking
1. Press [K5] button, LED displays “uu”and
switch on the main wash inlet valve for 10
min.
2. Press [K1] button, LED displays “u1” and
switch on prewash valve for 5s.
3. Press [K1] button, LED displays “u2” and
switch on the main wash inlet valve for 5s.
4. Press [K1] button to switch on main wash
and prewash valve and get the water lever
to setting level, then drain out the water.
LED displays “UU”
t09
Rotating
checking
Press [K5] button, inner drum rotates in
45r/m clockwise for 15s and stop for 10s then
rotates counterclockwise for 15s, over and over
again.
LED displays “tUB”
t10
Spin speed
checking
Press [K5] button , the number on the
display goes up in the same pace with the real
speed and when it reach 400rpm, you need to
press [K1] button to get the machine to reach
its target speed
LED displays “spn”
4 FACTORY PATTEN DETECTION
4.1. Service mode
Bekijk gratis de handleiding van Midea MF100T80B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF100T80B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12500 MB |
