Midea MF100T60B/W-FR handleiding
Handleiding
Je bekijkt pagina 9 van 37
4 FACTORY PATTEN DETECTION
LED
Display
Check
Target
Check Method Check Item
t01
Version
switchover
1. Press [K5] button
2. Press [K2] to change version
3. Press [K1] button continuously for
3s to confirm your change
LED displays“0xx”
x means current
version
t02
Error code
checking
1. Press [K5] button
2. Press [K1] to show the last code and press
[K2] to show the next code
3. Press [K2] and [K3] button at the same
time continuously for 3s, after hearing the
beep, all the error codes records deleted,
LED displays E00.
LED displays
“Err”
t03
Version
information
checking
1. Press [K5] button Enter into service mode,
LED displays “cod”.
2. Press [K5], LED displays project number.
3. Press [K1] button, LED displays version
number
LED displays version
number
t04
UI Checking Press [K5] button
The whole LED
display flashes
t05
Drain-pump
checking
Press [K5] button to drain out all the
remaining water. If all water drained out, LED
displays “EP”，and 6 minutes later ,if there is
still water remains in it, LED displays “FP”
LED displays “PPt”
t06
Pressure switch
checking
1. Press [K5] button to activate inlet valve.
LED displays level frequency once water
lever get the main wash level.
LED displays LL
8
4.1. Service mode
Bekijk gratis de handleiding van Midea MF100T60B/W-FR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF100T60B/W-FR |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12500 MB |
