Midea MF100T60B/W-FR handleiding
Handleiding
Je bekijkt pagina 10 van 37
9
LED
Display
Check
Target
Check Method Check Item
t07
Water
temperature
sensor and
heater checking
Press [K5] button to activate the main inlet
valve and get the water lever to heating level
then turn on the heater and 5 mins later
turned off automatically
LED displays the
current temperature
t08
Inlet valve
checking
1. Press [K5] button, LED displays “uu”and
switch on the main wash inlet valve for 10
min.
2. Press [K1] button, LED displays “u1” and
switch on prewash valve for 5s.
3. Press [K1] button, LED displays “u2” and
switch on the main wash inlet valve for 5s.
4. Press [K1] button to switch on main wash
and prewash valve and get the water lever
to setting level, then drain out the water.
LED displays “UU”
t09
Rotating
checking
Press [K5] button, inner drum rotates in
45r/m clockwise for 15s and stop for 10s then
rotates counterclockwise for 15s, over and over
again.
LED displays “tUB”
t10
Spin speed
checking
Press [K5] button , the number on the
display goes up in the same pace with the real
speed and when it reach 400rpm, you need to
press [K1] button to get the machine to reach
its target speed
LED displays “spn”
4 FACTORY PATTEN DETECTION
4.1. Service mode
Bekijk gratis de handleiding van Midea MF100T60B/W-FR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF100T60B/W-FR |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12500 MB |
