Midea MF100T60B/W-FR handleiding
Handleiding
Je bekijkt pagina 20 van 37
Error Code
Unit
Action
Causes Explanation
E10
In 7 minutes, the
water level
doesn’t
change with
valves
open
Unit will close
valve and stop
with Error code
display
Low Water
Pressure from
House Supply
If the washer fills very slowly, the
water pressure from the house
might be too low. If the water inlet
valve isn't leaking and there are no
other symptoms this problem does
not need to be corrected.
Water inlet
hose
Make sure that water faucet is
turned on and that the screens on
the hoses are not restricted.
Water inlet
valve
(The voltage on
the water inlet
valve is normal)
If the water pressure is good, try
cleaning the screens inside the
water inlet valve hose connection
ports. If those are clean replace the
water inlet valve.
Water level
sensor or
control switch
(No voltage on
the water inlet
valve)
A water lever control switch
controls how much water enters the
washing machine by PCB. If the
water level control switch is
defective, or more commonly, if the
small air pipe attached to the air
bell restricted, The switch will not
be able to close the electrical
contacts to the washer fill valve.
CHECK THE AIR PIPE
CHECK THE WATER LEVERL SENSOR
CHECK THE PCB and the inner wire
between PCB and the sensor
6 MALFUNCTION CODES AND EXPLANATIONS
19
Bekijk gratis de handleiding van Midea MF100T60B/W-FR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF100T60B/W-FR |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12500 MB |
