Handleiding
Je bekijkt pagina 21 van 126
Finish Cooking
1. Touching the heating zone selection control
that you wish to switch off.
2. Turn the cooking zone off by touching the
slider to “ ”. Make sure the displayshows “0”
Using the Boost Function
Activate the boost function
1. Touching the heating zone slider control.
2. Touching the boost control “ ”, the zone
indicator show “b” and the power reach Max.
3. Turn the whole cooktop off by touching the
ON/OFF control.
4. Beware of hot surfaces
H will show which cooking zone is hot to
touch. It will disappear when the surface has
cooled down to a safe temperature. It can also
be used as an energy saving function if you
want to heat further pans, use the hotplate
that is still hot.
Cancel the Boost function
1. Touching the heating zone selection control
that you wish to cancel the boost function.
2. Touching the “Boost” control to cancel the
Boost function, then the cooking zone will
revert to its original setting.
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
If the display flashes alternately with the heat setting
20
Bekijk gratis de handleiding van Midea MC-IF7040B2C-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MC-IF7040B2C-A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9384 MB |
