Handleiding
Je bekijkt pagina 20 van 126
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all
displays show “ – ” or “ – – ”, indicating that
the induction hob has entered the state of
standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the
surface Of the cooking zone are clean and dry.
How To Use
Start Cooking
4. Ajust heat setting by touching the the slider
control.
• If you don’t choose a heating zone setting
within 1 minute, the Induction hob will
automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time
during cooking.
3. Touching the heating zone slider control ,
and a indicator next to the key will flash
Power up
Power down
• Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the
cooking zone. Use pans whose diameter is as large as the graphic of the zone selected. Using a pot a
slightly wider energy will be used at its maximum efficiency. If you use smaller pot efficiency could be
less than expected. Pot less than 140 mm could be undetected by the hob. Always centre your pan on
the cooking zone.
• Always lift pans off the Induction hob – do not slide, or they may scratch the glass.
19
Bekijk gratis de handleiding van Midea MC-IF7040B2C-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MC-IF7040B2C-A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9384 MB |
