Handleiding
Je bekijkt pagina 8 van 20
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
8
PRIOR TO INSTALLATION
Before installing the indoor unit, ensure the compatibility with the
outdoor unit using the product data as a reference. It is also necessary to
confirm the proper application of the equipment and to perform a heat
load calculation for proper sizing.
Step 1 - Check Equipment
Unpack the unit and move to the final location. Remove the carton, taking
care not to damage the unit. Inspect the equipment for damage prior to
installation. File a claim with the shipping company if the shipment is
damaged or incomplete. Locate the unit rating plate, which contains the
proper installation information. Check the rating plate to be sure the unit
matches the job specifications.
The indoor unit should be installed in a location that meets the following
requirements:
• Enough room for installation and maintenance
• Enough room for the lineset and
drainpipe
• A horizontal ceiling and a structure that can sustain the weight of the
indoor unit
• The air inlet and outlet are not impeded
Step 2 - Select the Installation Location
Before installing the indoor unit, choose an appropriate location.
The following are standards that should help you choose an
appropriate location for the unit.
Fig. 6 — Select installation location
Proper installation locations must meet the following standards:
1. Good air circulation
2. Convenient drainage
3. Noise from the unit will not disturb others
4. Firm and solid—the location will not vibrate
5. A location at least 3.28 ft. (1m) from all other electrical devices (e.g.,
TV, radio, computer)
6. DO NOT install the unit in the following locations:
a. Near any source of heat, steam, or combustible gas
b. Near flammable items such as curtains or clothing
c. Nea
r any obstacle that might block air circulation
d. Near the doorway
e. In a location subject to direct sunlight
NOTE: When selecting a location leave ample room for a wall
hole (refer to the drill wall hole for connective piping
step) for the signal cable and refrigerant piping that
connect the indoor and outdoor units. The default
position for all piping is the right side of the indoor
unit (while facing the unit). However, the unit can
accommodate piping to either left or right.
DO NOT install the unit in the following locations:
• Areas with oil drilling or fracking
• Coastal areas with high salt content in the air
• Areas with causti
c gases in the air, such as near hot springs
• Areas with power fluctuations, such as factories
• Enclosed spaces, such as cabinets
• Areas with strong electromagnetic waves
• Areas that store flammable materials or gas
• Rooms with high humidity, such as bathrooms or laundry rooms.
CAUTION
PRODUCT INSTALLATION
• Installation must be performed by an authorized dealer or
specialist. A defective installation can cause water leakage,
electrical shock, or fire.
• The installation must be performed according to the installation
instructions. Improper installation can cause water leakage,
electrical shock, or fire. (In North America, installation must be
performed in accordance with the requirements of NEC or CEC
by authorized personnel only.)
• Contact an authorized service technician for repair or
maintenance of this unit. This appliance must be installed in
accordance with local codes.
• Only use the included accessories, parts, and specified parts for
installation. Using non-standard parts can cause
water leakage,
electrical shock, fire, or unit failure.
• Install drainage piping according to the instructions in this
manual. Improper drainage may cause water damage to your
home and property.
• For units that have an auxiliary electric heater, DO NOT install
the unit within 3 feet (1 meter) of any combustible materials.
• DO NOT install the unit in a location that may be exposed to
combustible gas leaks. If combustible gas accumulates around
the unit, it may cause a fire.
WARNING
5in (127mm)
or more
6 ft (1.8m)
5in (127mm)
or more
6in (152mm)
Bekijk gratis de handleiding van Midea MASAG18-21HS2G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MASAG18-21HS2G |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3297 MB |
