Midea H1-(5-20)-E0 handleiding
Handleiding
Je bekijkt pagina 20 van 32
Step4: External electrical connection
19
BAT-
BMS
BAT-
BAT+
COM
BAT+
BAT-
BMS
BAT+
BAT-
BAT+
COM
Cascading Batteries (Optional)
Battery Cascading Cable Connection
Signal cable
DC input cable
1.Remove the insulation of the cable. For
outside use, cables of
≥ 4mm² are
recommended for Grounding).
2.Crimp the cable to the ring terminal:
3.Install the crimped ring terminal and the washer with M4 screws and tighten
these with a torque of 1.5 Nm using an Allen key.
L2=L1+(2-3)mm
L1
L3
《2mm
L4《1.5mm
Connect the bidirectional DC/DC unit Com Terminal to the inverter BMS port for
communication between inverter and energy storage system.The following is an
example of the storage inverter:
Connection of a grounding cable
Bekijk gratis de handleiding van Midea H1-(5-20)-E0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | H1-(5-20)-E0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3049 MB |
