Midea H1-(5-20)-E0 handleiding
Handleiding
Je bekijkt pagina 16 van 32
Align the first energy storage module on the base, install the connectors on
both sides, and tighten the 8 screws on both sides. Install the remaining
energy storage modules and bidirectional DC/DC unit from bottom to top.
Step 2: Installing the energy storage modules and bidirectional DC/DC unit
Determine the drilling position according to the fixed position of the Anti-tip
bracket, and mark the positions using a marker. And then drill holes and install
expansion bolts.
STEP 3：Installing expansion bolts
1-Base 2-Energy storage module 3-Bidirectional DC/DC unit
Figure.3-5 Installing the energy storage and bidirectional DC/DC unit diagram
Figure.3-6 Marking the tracing position Figure.3-7 Expansion bolts installation
1
2
3
15
The expansion bolts delivered with the battery are mainly used for solid concrete
walls. If other types of walls are used, ensure that the walls meet the loadbearing
requirements (one energy storage module weighs 52kg) and select the bolts by
yourself.
NOTE
(1)Mounting hole
(2)Installing expansion bolt
(3)Loosen the nut
(4)Remove the nut
φ8
45-50mm
Bekijk gratis de handleiding van Midea H1-(5-20)-E0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | H1-(5-20)-E0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3049 MB |
