Handleiding
Je bekijkt pagina 145 van 180
23
Drill wall hole
Model D
The size of the wall hole is determined by the connective pipes. When the pipe size of the gas side
is 16mm(5/8") or more, the wall hole should be 90mm(3.54in). When the pipe size of gas side
is less than 16mm(5/8"), the wall hole should be 65mm(2.56in).
NOTE
: THE WALL HOLE SIZE
Φ
Φ
Using a 65mm (2.56") or 90mm(3.54")
core drill(depending on models ), drill a
hole in the wall. Make sure that the hole
is drilled at a slight downward angle, so
that the outdoor end of the hole is lower
than the indoor end by about 5mm to
7mm (0.2-0.28"). This will ensure
proper water drainage.
Place the protective wall cu in the hole.
This protects the edges of the hole and
will help seal it when you finish the
installation process.
When drilling the wall hole, make sure to avoid wires, plumbing, and other
sensitive components.
CAUTION
Φ 90mm
(3.54")
Φ 65mm
(2.56")
Step 1：
Step 2：
Using a 65mm (2.56") or 90mm(3.54")
core drill(depending on models )
Wall
Indoor
Outdoor
5-7mm
(0.2-0.28")
Fig.3.2
Drill the wall hole
Place the protective wall cu in the hole.
wall hole.
the protective
wall cu
Indoor unit
outline
330 (12.99)
1055 (41.54)
101(3.98)
536(21.1)
69.2(2.72)
53(2.1)
φ
Pipe hole
90(3.54)
φ
Pipe hole
90(3.54)
131.8(5.19)
Bekijk gratis de handleiding van Midea EZ-12RD6-I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | EZ-12RD6-I |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 20817 MB |
