Middle Atlantic RLNK-410R-IEC-NS handleiding

Niet gecategoriseerd

Middle Atlantic

72 pagina's

PDF beschikbaar

Handleiding

Page 54

UNDERSTANDING AN AUTOPING CONFIGURATION

This section takes you through an AutoPing configuration where your RackLink reboots a

modem/router in the evet that its Internet connection stops working.

NOTE:

• A proper AutoPing configuration prevents cyclic outlet rebooting. Cyclic outlet rebooting is the

result of AutoPing settings not taking the modem/router’s start-up time into account. This

results in your RackLink continuously turning the controlled outlet on and off.

• Understand that email notifications are not received in the event that your Internet connection

goes down. Instead, a recovery notification is sent when the connection is reestablished. Refer

to the log entry for more information about when the actual failure occurred. For more

information, see “Viewing Status Log Information” on page 37.

Connecting Your Equipment

This picture shows the following connections you should make to your equipment:

• Connect your modem/router’s (black box above the RackLink) power cable into a controlled

outlet on the RackLink.

• Connect your RackLink’s Ethernet cable (blue) into switch port 1 on the modem/router.

• Connect your modem/router to the Internet (yellow cable).

Bekijk gratis de handleiding van Middle Atlantic RLNK-410R-IEC-NS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.