Middle Atlantic RLNK-410R-IEC-NS handleiding

Niet gecategoriseerd

Middle Atlantic

72 pagina's

PDF beschikbaar

Handleiding

USING THE BROWSER-BASED INTERFACE

Page 43

The Device Settings screen appears.

4. Configure the Device Settings screen as follows:

• In the Device Name field, enter your desired name for your RackLink device. This value

appears in the top of the browser-based interface and is shown in the RackLink Discovery

Tool.

• In the Account Name/Number field you may enter a user-defined value for your own

reference.

• In the Device Description field, you may provide a description for your RackLink device.

• In the Location field, specify a particular location where your RackLink device is kept.

• In the Initial Outlet State drop down, select from the following values:

o Select Remember prior state to have the outlets remain in their prior state

o Select OFF to have the outlets Off during power up as their default setting.

o Select ON to have the outlets On during power up as their default setting.

NOTE: This setting is only applicable to outlets that are not included in sequencing or when

Sequence on Power Up is Off. On is the factory default setting for an outlet.

For more information about which outlets are included or excluded from sequencing, see

“Configuring Outlet Controls” on page 32.

• Turn Sequence on Power Up On or Off to determine whether or not your RackLink device

will perform a sequence while powering up. The default setting is On.

Bekijk gratis de handleiding van Middle Atlantic RLNK-410R-IEC-NS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.