Middle Atlantic RLNK-410R-IEC-NS handleiding

Niet gecategoriseerd

Middle Atlantic

72 pagina's

PDF beschikbaar

Handleiding

USING THE BROWSER-BASED INTERFACE

Page 36

NOTE: The Alert LED is red if any outlet has a failed AutoPing, or green if all outlets

indicate AutoPing replied.

• In the Enabled field, select to turn AutoPing On or Off for the specific outlet.

• In the IP Address field, enter the IP address of the Ping device.

• In the Frequency field, enter how often (in seconds) your RackLink device initiates an

AutoPing. You can configure 30 - 999 seconds and the default is 30.

• In the Retries field, enter the number of times your RackLink device will Ping the preset

address if no response is received. You can configure 2 - 200 retries and the default is 3.

For example, using the default settings with a Frequency of 30 seconds and three

Failures, the device being Pinged would need to be offline for 90 seconds before the

recovery action is executed.

• In the Email Enabled field, select to turn email notifications On or Off for the specific

AutoPing from your outlet.

For more information, see “Configuring Email Settings” on page 44.

• In the Recovery Action drop-down field, set a desired outlet action while the configured

Ping device does not reply. The actions cease whenever the Ping device does reply. The

actions include the following:

o Power-cycle Until Recovery

o Power-cycle Once

o Power Off Pending Recovery

o Power Off

o Power On Pending Recovery

o Power On

NOTE: Only one action per outlet can be performed at a time.

• In the Cycle Time field, enter a cycle time delay value (in seconds) for the specific

AutoPing recovery action. You can configure the delay to be between 1 - 999 (inclusive)

seconds and the default is 3.

NOTE: The Cycle Time option only appears when the Power-cycle Until Recovery action

is selected.

7. Click Save.

TIP: To restore the default settings, see “Restoring Factory Defaults” on page 46.

Bekijk gratis de handleiding van Middle Atlantic RLNK-410R-IEC-NS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.