Microlife PF 200 BT handleiding
Handleiding
Je bekijkt pagina 7 van 143
5Microlife PF 200 BT
EN
9. Bluetooth® function operation
Turn on/off the Bluetooth® datalink function
1. Press O/I button 1 for 4 seconds while device is off to activate the Bluetooth
®
data-
link function; device display will show a blinking Bluetooth
®
AL symbol and the device
identifier.
2. The Bluetooth
®
will remain activated to scan for compatible Bluetooth
®
mobile appli-
cation to connect to; if no connection is made after 120 seconds, device will show
rapidly blinking Bluetooth
®
AL symbol to indicate that no connection made, then it will
automatically deactivate.
3. Press O/I button 1 while device Bluetooth
®
is activated to turn off the Bluetooth
®
function.
Software data transfer via Bluetooth® datalink
1. While device Bluetooth
®
function is activated, if a compatible mobile application is
found over Bluetooth
®
, device will automatically connect to the software. If a
successful connection between device and software is established, the Bluetooth
®
symbol AL on the device display will stop blinking and a 4-part circle animation AM
will appear to indicate on-going Bluetooth
®
connection.
2. When connected, the device will execute data transfer from the device memory to
the software via Bluetooth
®
automatically.
3. After completion of successful data transfer, the device will automatically disconnect
from the software and turn off the Bluetooth
®
function.
4. Refer to the FAQ in the mobile application menu for details.
10. USB datalink function operation
Turn on/off the USB datalink function
1. Connect the device to a computer via USB data cable while the device is turned off.
2. Press O/I button 1 to turn the device on to activate USB datalink function. When
USB datalink function is activated, the device will show «USb» blinking on the display
and automatically search for compatible software on the computer for data transfer.
3. Disconnect USB data cable to deactivate USB datalink function.
Software data transfer via USB datalink
1. While device USB datalink function is activated, the compatible computer can
communicate with the device and execute data transfer per user operation. Refer to
software help / user manual for information about how to use the software. The
device will show the 4-part cycle animation on the display when communicating to
the computer software.
2. After completion of data transfer on the computer software, you can disconnect the
device, computer and the USB data cable.
11. Device error and troubleshooting
Device error and troubleshooting
Common issues and troubleshooting
Other possible errors and their solutions: If problems occur when using the device, the
following points should be checked.
12. Device maintenance and disposal
Cleaning
Cleaning the mouthpiece and the measuring tube
The peak flow mouthpiece and measuring tube should be cleaned within 30 minutes after
each use.
1. Separate the measuring tube 4 and mouthpiece 5 from the device's main body.
Disconnect the mouthpiece 5 from the measuring tube 4 by moving it in a forward
direction.
2. Immerse the mouthpiece 5 in a prepared soap solution of water and regular dish-
washing soap. Thoroughly clean by swirling in the prepared soap solution. Thor-
oughly rinse the mouthpiece 5 with water (distilled water is recommended). Allow
the device to air dry.
NOTE: Do not tap against hard surfaces to avoid damage.
3. Immerse the measuring tube 4 in a prepared soap solution and thoroughly clean by
swirling in the prepared soap solution. For cleaning the measuring tube, it is best to
use distilled water. Be careful not to damage the turbine assembly. Thoroughly rinse
the measuring tube with water then air dry.
4. Visually inspect the measuring tube 4 and mouthpiece 5 after cleaning for residual
mucus or debris inside – the measuring tube and mouthpiece should be free of any
debris that may interfere with the turbine assembly inside the measuring tube.
NOTE: DO NOT immerse the measuring tube in boiling water!
Bluetooth® pairing between the device and app is required when using the
Bluetooth® datalink function for the first time. Please refer to the FAQ of the app
for information about using the app and Bluetooth® pairing with the device.
Error Message Possible cause(s) Solution
«Er 1» The result cannot be
recorded in memory
because device date and
time is not set.
Set device date and time.
«no» There is no data stored in
device memory.
Set device date and time
then take measurements.
«Hi» The PEF value is higher
than the PEF range upper
limit of 900 ml/min.
Please repeat the
measurement.
Bluetooth
®
symbol AL
blinking rapidly: Bluetooth
®
connection error.
Bluetooth
®
connection not
established successfully or
Bluetooth
®
connection ends
abnormally
Turn off the device and the
software, then re-try
connection in Bluetooth
®
datalink function.
Issues Possible cause(s) Solution
The device display
remains blank while
batteries are installed.
Batteries are installed
incorrectly or low in
voltage.
1. Check the polarity (+/-) of the
battery installation.
2. If the display is erratic or
unusual, remove the batteries
and re-install new batteries.
The devices fails to
provide a reading
during measurement,
or the measurement
reading appears abnor-
mally low or high.
Device does not detect
the turbine wind wheel
rotation correctly, due to
incorrect measurement,
incorrect measuring tube
installation, or wind wheel
being stuck from foreign
objects in the turbine.
Ensure the measurement is
taken according to the correct
procedure.
Ensure that the measuring
tube is correctly installed in
the device.
Ensure that the wind wheel of
the turbine in the measuring
tube is rotating when air is
blown through the tube. Any
objects, dust, liquids or mucus
may interfere with the wind
wheel rotation - clean the
turbine and measuring tube
as needed.
Discuss the abnormal read-
ings with your doctor as
needed.
The unit fails to take a
measurement, year is
blinking.
Device date and time
setting is not set.
Ensure the device date and time
setting are set.
Error Message Possible cause(s) Solution
Bekijk gratis de handleiding van Microlife PF 200 BT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microlife |
| Model | PF 200 BT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22144 MB |