Microchip MPF050TL handleiding

102 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 71 van 102
AC Switching Characteriscs
Data Sheet
© 2024 Microchip Technology Inc. and its subsidiaries
DS00003831E - 71
...........continued
Parameter Data Rate Condition Min Max Unit
Receive jitter
tolerance
196.608 Mbps S200
1
500 ps
393.22 Mbps S400
2
1025 ps
786.43 Mbps S800
2
375 ps
1. DS mode.
2. Beta mode.
3. PolarFire complies with 1394 S800 electrical requirements with the exception of Tx eye
requirement. For more details, refer to the PolarFire FPGA FireWire Characterization Report.
5.5.16 SLVS-EC
The following table describes SLVS-EC.
Table 5-66. SLVS-EC
Parameter Data Rate Condition Min Max Unit
Total transmit jitter 2.376 Gbps 0.4 ps
Receive jitter tolerance 2.376 Gbps 0.15 SJ at 2 MHz 0.5 ps
5.0 Gbps 0.15 SJ at 4 MHz 0.5 ps
5.6 Non-Volale Characteriscs
The following section describes non-volatile characteristics.
5.6.1 FPGA and μPROM Programming Cycle and Retenon
The following table describes FPGA and μPROM programming cycle and retention characteristics.
Programming, zeroization, and verify operations all count as a programming cycle.
Retention characteristics for Military-grade devices and Automotive-grade devices at the absolute
maximum junction temperature of 125 °C can be proled using the PolarFire Retention Calculator,
which can be obtained through technical support at microchip.com/support.
Table 5-67. FPGA and μPROM Programming Cycles vs. Retenon Characteriscs
Programming T
J
Programming Cycles, Max Retention Years Retention Years at T
J
0 °C to 85 °C 1000 20 85 °C
0 °C to 100 °C 500 20 100 °C
–20 °C to 100 °C 500 20 100 °C
–40 °C to 100 °C 500 20 100 °C
–40 °C to 85 °C 1000 16 100 °C
–40 °C to 55 °C 2000 12 100 °C
–40 °C to 100 °C 500 20 100 °C
–40 °C to 100 °C 500 10 110 °C
–40 °C to 100 °C 500 Note 2 125 °C
Notes:
1. Power supplied to the device must be valid during programming operations such as
programming and verify. Programming recovery mode is available only for in-application
programming mode and requires an external SPI Flash.

Bekijk gratis de handleiding van Microchip MPF050TL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMicrochip
ModelMPF050TL
CategorieNiet gecategoriseerd
TaalNederlands
Grootte18409 MB