Microchip MPF050TL handleiding
Handleiding
Je bekijkt pagina 70 van 102
AC Switching Characteriscs
Data Sheet
© 2024 Microchip Technology Inc. and its subsidiaries
DS00003831E - 70
1. For data rates greater than 10.3125 Gbps, V
DDA
must be set to 1.05V mode. See supply tolerance
in the section Recommended Operating Conditions.
2. Supported on –1 speed grade only.
5.5.12 Fiber Channel
The following table describes Fiber Channel.
Table 5-62. Fiber Channel
Parameter Data Rate Condition Min Max Unit
Total transmit jitter 1.0625 Gbps — — 0.23 UI
2.125 Gbps — — 0.33 UI
4.25 Gbps — — 0.52 UI
8.5 Gbps — — 0.31 UI
Receive jitter tolerance 1.0625 Gbps 0.68 — — UI
2.125 Gbps 0.62 — — UI
4.24 Gbps 0.62 — — UI
8.5 Gbps 0.71 — — UI
5.5.13 HiGig and HiGig+
The following table describes HiGig and HiGig+.
Table 5-63. HiGig and HiGig+
Parameter Data Rate Condition Min Max Unit
Total transmit jitter 3.75 Gbps Near-end — 0.35 UI
3.75 Gbps Far-end — 0.55 UI
Receive jitter tolerance 3.75 Gbps — 0.65 — UI
5.5.14 HiGig II
The following table describes HiGig II.
Table 5-64. HiGig II
Parameter Data Rate Condition Min Max Unit
Total transmit jitter 6.875 Gbps Near-end — 0.35 UI
6.875 Gbps Far-end — 0.55 UI
Receive jitter tolerance 6.875 Gbps — 0.65 — UI
5.5.15 FireWire IEEE
®
1394
The following table describes FireWire IEEE 1394.
Table 5-65. FireWire IEEE 1394
Parameter Data Rate Condition Min Max Unit
Total transmit jitter 196.608 Mbps S200 Near-end
1
— 200 ps
393.22 Mbps S400 Near-end
2
— 516 ps
786.43 Mbps S800 Near-end
2, 3
— 200 ps
Bekijk gratis de handleiding van Microchip MPF050TL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microchip |
| Model | MPF050TL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18409 MB |
