Microchip MPF050TL handleiding
Handleiding
Je bekijkt pagina 22 van 102
DC Characteriscs
Data Sheet
© 2024 Microchip Technology Inc. and its subsidiaries
DS00003831E - 22
a. HSIO lane: 120 mA per 12 I/O buers.
b. GPIO lane: 160 mA per 12 I/O buers.
3. V
OH_MAX
is based on external pull-up termination (pseudo-open drain).
4. I
OL
/I
OH
units for impedance standards are in amps (not mA).
4.3.4 HSIO On-Die Terminaon
The following tables list the on-die termination calibration accuracy specications for the HSIO bank.
Table 4-21. Single-Ended (Internal Parallel) Thevenin Terminaon
Min (%) Typ Max (%) Unit Condition
–40 50 20 Ω V
DDI
= 1.8V/1.5V/1.35V/1.2V
–40 75 20 Ω V
DDI
= 1.8V
–40 150 20 Ω V
DDI
= 1.8V
–20 20 20 Ω V
DDI
= 1.5V/1.35V
–20 30 20 Ω V
DDI
= 1.5V/1.35V
–20 40 20 Ω V
DDI
= 1.5V/1.35V
–20 60 20 Ω V
DDI
= 1.5V/1.35V
–20 120 20 Ω V
DDI
= 1.5V/1.35V
–20 60 20 Ω V
DDI
= 1.2V
–20 120 20 Ω V
DDI
= 1.2V
Note: Thevenin impedance is calculated based on independent P and N as measured at 50% of V
DDI
.
For 50Ω/75Ω/150Ω cases, the nearest supported values of 40Ω/60Ω/120Ω are used.
Table 4-22. Single-Ended (Internal Parallel) Terminaon to V
DDI
Min (%) Typ Max (%) Unit Condition
–20 34 20 Ω V
DDI
= 1.2V
–20 40 20 Ω V
DDI
= 1.2V
–20 48 20 Ω V
DDI
= 1.2V
–20 60 20 Ω V
DDI
= 1.2V
–20 80 20 Ω V
DDI
= 1.2V
–20 120 20 Ω V
DDI
= 1.2V
–20 240 20 Ω V
DDI
= 1.2V
Note: Measured at 80% of V
DDI
.
Table 4-23. Single-Ended (Internal Parallel) Terminaon to V
SS
Min (%) Typ Max (%) Unit Condition
–20 120 20 Ω V
DDI
= 1.8V/1.5V
–20 240 20 Ω V
DDI
= 1.8V/1.5V
–20 120 20 Ω V
DDI
= 1.2V
–20 240 20 Ω V
DDI
= 1.2V
Note: Measured at 50% of V
DDI
.
Bekijk gratis de handleiding van Microchip MPF050TL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microchip |
| Model | MPF050TL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18409 MB |
