MGL Avionics Vega TP-3 handleiding
Handleiding
Je bekijkt pagina 20 van 28
Vega TP-3 Operating Manual Page 20
Westach Resistive Senders: Westach 399 thermistor series
temperature senders.
User defined senders: The TP-3 has a user sender calibration
feature that can be customized for senders not listed above
Current Sensors MGL Avionics Magnetic Closed Loop Current Sensor
Voltage measurement range Up to 32Vdc
Voltage resolution 0.1V
8 Operating the alarms
The alarm output can be used to switch an external alarm indicator. The external alarm switch is an open collector
transistor switch to ground with a maximum rating of 0.25A DC. It is possible to wire the alarm contacts of several
Stratomaster instruments in parallel should this be desired. To avoid false activation of the alarms, the alarm function is
only active 10 seconds after the instrument has powered up.
9 Firmware Upgrading
The TP-3 can be upgraded in the field by connecting the RS232 port to a PC and running the firmware update program.
Note that only the RS232 port can be used to upgrade the firmware.
Please see the Vega firmware upgrading document for more information.
Bekijk gratis de handleiding van MGL Avionics Vega TP-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MGL Avionics |
| Model | Vega TP-3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4659 MB |
