Metra JP-1020 handleiding

12 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 4 van 12
386.257.1187
|
MetraOnline.com
4
1. Remove the lower dash below the
steering column. (Figure H)
2. Using a panel tool, remove the end cap.
(Figure I)
3. Remove the (8) screws from the panel.
(Figure J)
4.
Remove the trim from the top of the
steering column to expose (2) screws
to
the right of the headlight switch.
(Figure K)
5. Remove (1) screw that is behind the
headlight panel.
6. The upper headlight switch panel will
separate from the lower grille assembly.
7. Remove the lower panel and put aside
to prep for cutting.
Continue to Passenger Side Disassembly
DRIVER SIDE DISASSEMBLY
Figure H
1
Figure J
3
NOTE: The Dash Disassembly photos are
shown with corresponding Step Numbers in
yellow, and circled. Locations of screws to be
removed are approximate.
Lower Dash Panel
Remove 8 screws
from behind this panel
Figure I
Figure K
Remove trim from
steering column
Remove
end cap
2
4
Remove
Switch

Bekijk gratis de handleiding van Metra JP-1020, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMetra
ModelJP-1020
CategorieSpeaker
TaalNederlands
Grootte9725 MB