Metra JP-1020 handleiding

Handleiding

123456789101112/ 12

Afdrukken

Je bekijkt pagina 3 van 12

REV. 7/8/24 INSTJP-1020

3

DASH DISASSEMBLY

CONT

Figure E

5. Remove the cover on the inside of the

passenger grab handle and remove the

(3) Phillips screws behind the handle.

(Figure E)

6.

Using a panel tool, pry the trim panel from

the start button to the AC controls and

over to the passenger handle. (Figure F)

Unplug the START button and AC controls.

7. Remove the (1) Phillips screw and (2)

8mm bolts on the remaining handle

assembly.

(Figure G)

NOTE: The Dash Disassembly photos are highlighted in yellow. Locations of screws to be

removed are approximate.

Figure H: Remove the (5) Phillips screws along the top of the radio screen and over the instrument cluster.

Figure G : Remove the trim panel , then the (1) Phillips screw and (2) 8 mm bolts

Location of trim panel to remove.

See detail in Figure G.

8. Remove the (5) Phillips screws along the top of the radio screen and over the instrument cluster.

(Figure H)

9.

Using a panel tool, pry the clips holding the radio in place. Unplug the (2) harnesses from the radio.

Continue to Driver Side Disassembly

Figure F

123456789101112/ 12

Bekijk gratis de handleiding van Metra JP-1020, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Speaker